钻削中产生迷切现象的机理研究

随着科学技术的发展．对孔加工精度的要求越来越高．钻削过程中的速切现象对孔加工的形状精度、位置精度有很大的影响．本文用试验、观察、解析的方法分析了钻头迷切现象与各种因素的关系，对提高孔加工精度有了新的揭示．     

V型天线的行波加载公式

本文研究了ｖ型天线上电流分布与阻抗加载的关系，导出了支持天线上行波电流的阻抗加载公式。讨论了天线张角、振子半径以及振子长度与加载量的关系和规律，说明了加载Ｖ型天线的宽带特性。文中还计算了在高斯脉冲激励下，不同加载量的天线上瞬态电流的分布，由此可以表明所导加载公式的正确性与重要性。     

最佳相位设计的MBE声码器语音合成

提出了一种基于最佳相位设计的语音合成技术,能够有效降低MBE声码器合成语音信号由于波形失衡而导致的饱和失真的概率.此外,为了保证合成滤波器的稳定性,对线谱频率(LSF)系数提取进行了优化.实验结果显示,合成语音信号波形近似平衡地分布在零幅度值的上下,语音听起来没有不舒服的感觉.实验结果表明,基于最佳相位设计的语音合成技术能够有效改善合成语音质量.     

发电机组低励限制的功能特点及试验

分析低励限制的应用目标和功能特点,在此基础上,提出低励试验目的和内容,为正确发挥低励限制功能及并网预防事故发生提供参考。     

基于JavaScript实现随机数的分组抽取

通过一个随机数的分组抽取小实例,对JavaScript脚本语言做了简要说明,对初学者入门深有裨益。     

Selection of optimized features for fusion of palm print and finger knuckle‐based person authentication

The impact of digital technology in biometrics is much more efficient at interpreting data than humans, which results in completely replacement of manual identification procedures in forensic science. Because the single modality‐based biometric frameworks limit performance in terms of accuracy and anti‐spoofing capabilities due to the presence of low quality data, therefore, information fusion of more than one biometric characteristic in pursuit of high recognition results can be beneficial. In this article, we present a multimodal biometric system based on information fusion of palm print and finger knuckle traits, which are least associated to any criminal investigation as evidence yet. The proposed multimodal biometric system might be useful to identify the suspects in case of physical beating or kidnapping and establish supportive scientific evidences, when no fingerprint or face information is present in photographs. The first step in our work is data preprocessing, in which region of interest of palm and finger knuckle images have been extracted. To minimize nonuniform illumination effects, we first normalize the detected circular palm or finger knuckle and then apply line ordinal pattern (LOP)‐based encoding scheme for texture enrichment. The nondecimated quaternion wavelet provides denser feature representation at multiple scales and orientations when extracted over proposed LOP encoding and increases the discrimination power of line and ridge features. To best of our knowledge, this first attempt is a combination of backtracking search algorithm and 2D²LDA has been employed to select the dominant palm and knuckle features for classification. The classifiers output for two modalities are combined at unsupervised rank level fusion rule through Borda count method, which shows an increase in performance in terms of recognition and verification, that is, 100% (correct recognition rate), 0.26% (equal error rate), 3.52 (discriminative index), and 1,262 m (speed).     

Water table fluctuation with a random initial condition

The nonlinear Boussinesq equation is used to understand water table fluctuations in various ditch drainage problems. An approximate solution of this equation with a random initial condition and deterministic boundary conditions, recharge rate and aquifer parameters has been developed to predict a transient water table in a ditch-drainage system. The effects of uncertainty in the initial condition on the water table are illustrated with the help of a synthetic example. These results would find applications in ditch-drainage design.Notation A / tanh t - a lower value of the random variable representing the initial water table height at the mid point - a+b Upper value of the random variable representing the initial water table height at the midpoint - B tanh t - C 4/ - h variable water table height - h mean of the variable water table height - h _m variable water table height at the mid point - h _m mean of the variable water table height at the mid point - K hydraulic conductivity - L half spacing between the ditches - m ₀ initial water table height at the mid point - N Uniform rate of recharge - S specific yield - t time of observation - x distance measured from the ditch boundary - (4/SL)(NK)^1/2 - (L/4)(N/K)^1/2 - dummy integral variable     

低成本钢尾渣-矿渣基矿山充填料的优化开发

 为实现多固废协同利用、降低充填成本,在矿渣基全粒级细尾砂胶结充填料基础上,以流动性和抗压强度为表征,利用热闷钢渣磁选尾渣(钢尾渣)替代部分矿渣作为胶凝材料,脱硫灰和水泥熟料替代部分专用添加剂作为外加剂,采用正交试验探寻掺量规律,优化固体填充料配比,开发钢尾渣-矿渣基软性矿山充填料,并研究了外加剂与胶材比、灰砂比等因素的影响。对比分析了矿渣基准组、钢尾渣-矿渣基准组(B1)、强度最优外加剂组分钢尾渣-矿渣组(B7)等3组充填料的微观形貌及XRD图谱以探究其水化机理。结果表明,钢尾渣替代矿渣量增加、外加剂与胶材比减小,充填料浆流动性改善,但充填体抗压强度下降。强度正交试验结果表明,钢尾渣掺量大小决定强度低高,脱硫灰掺量宜高于水泥熟料。进一步调整外加剂组分配比,在灰砂比为1∶6、钢尾渣替代矿渣为20%条件下,找出B7组外加剂组分为脱硫灰、水泥熟料分别替代30%、20%专用添加剂,B7组料浆扩展度为143 mm,充填体形貌为富铁绿泥石胶结假方体钙硅灰石,28 d抗压强度达2.13 MPa,较基准组低0.19 MPa,较B1提高0.26 MPa。该替代方案满足现场充填C2级强度的要求,改善流动性并显著降低了充填成本。优化的外加剂组分配比在灰砂比为1∶4条件下同样具有强度优化作用,但较灰砂比为1∶6条件下低。     

含钛高炉渣制备CaTiO3-多孔地质聚合物光降解吸附材料

含钛高炉渣作为固体废弃物,国内存量巨大,且其中的钛组元难以提取,导致含钛高炉渣综合利用一直没有得到有效解决。针对当前含钛高炉渣利用率低、附加值低等问题,基于含钛高炉渣成分特点,通过选择性析晶(CaTiO₃优势析出)、碱激发,制备出CaTiO₃-多孔地质聚合物的复合材料。试验结果表明,析晶温度1 400 ℃、保温1 h能够促进CaTiO₃的优势析出,而剩余氧化物以玻璃相形式存在。制备出的CaTiO₃-多孔地质聚合物材料结合了CaTiO₃高光催化活性与多孔地质聚合物比表面积大的优点,对亚甲基蓝具有优异的吸附效果,最大吸附量可达60.4 mg/g。在投加量为50 mg,2 h吸附、3 h光降解条件下,对亚甲基蓝去除率可达94.5%,在治理有机污染领域有良好的应用前景。     

Structure and electronic properties of SiC thin-films deposited by RF magnetron sputtering

SiC thin-films were prepared by RF-magnetron sputtering technique(RMS) with the target of single crystalline SiC and then annealed. The surface morphology of thin-films was characterized by AFM. The result shows that the surface of the thin-films is smooth and compact; XRD analysis reveals that the thin-films are amorphous. The thickness, square-resistance and curves of resistance—temperature were measured. The results show that the curves of lnR versus 1/kT both before and after annealing satisfy the expression of lnR∝△W/kT, where ?W is electron excitation energy in the range of 0.014 2-0.018 5 eV, and it has a trend of increasing when the temperature is increased. After synthetical analysis we get the conclusion that the electronic mechanism of the thin-films is short distance transition between the localized states in the temperature range of 25-250 ℃. The resistivity is in the range of 2.4×10-3-4.4×10-3 Ω·cm and it has the same trend as electron excitation energy when annealing temperature is increased, which further confirms the electronic mechanism of thin-films and the trend of electron excitation energy versus annealing temperature.